CY7C68300C, CY7C68301C
CY7C68320C, CY7C68321C
Document 001-05809 Rev. *B Page 9 of 42
Pin Descriptions
The following table lists the pinouts for the 56-pin SSOP, 56-pin QFN, and 100-pin TQFP package options for the AT2LP. Refer to the
“Pin Diagrams” on page 4 for differences between the 68300C/01C and 68320C/321C pinouts for the 56-pin packages. For information
on the CY7C68300A pinout, refer to the CY7C68300A data sheet that is found in the ’EZ-USB AT2’ folder of the CY4615C reference
design kit CD.
Notes
1. If byte 8, bit 4 of the EEPROM is set to ‘0’, the ATA interface pins are only active when VBUS_ATA_EN is asserted. See “VBUS_ATA_ENABLE” on page 14.
2. A ‘#’ sign after the pin name indicates that it is active LOW.
3. The General Purpose inputs can be enabled on ATAPUEN, PWR500#, and DRVPWRVLD via EEPROM byte 8, bit 7 on CY7C68320C/CY7C68321C.
Table 1. AT2LP Pin Descriptions
Note: (Italic pin names denote pin functionality during CY7C68300A compatibility mode)
100
TQFP
56
QFN
56
SSOP
Pin Name
Pin
Type
Default State
at Startup
Pin Description
1 55 6 V
CC
PWR V
CC
. Connect to 3.3V power source.
2 56 7 GND GND Ground.
3 1 8 IORDY I
[1]
Input ATA control. Apply a 1k pull up to 3.3V.
4 2 9 DMARQ I
[1]
Input ATA control.
5
6
7
8
N/A N/A GND Ground.
9 3 10 AV
CC
PWR Analog V
CC
. Connect to V
CC
through the shortest path
possible.
10 4 11 XTALOUT Xtal Xtal 24 MHz crystal output. (See “XTALIN, XTALOUT” on
page 12).
11 5 12 XTALIN Xtal Xtal 24 MHz crystal input. (See “XTALIN, XTALOUT” on
page 12).
12 6 13 AGND GND Analog ground. Connect to ground with as short a
path as possible.
13
14
15
N/A N/A NC No connect.
16 7 14 V
CC
PWR V
CC
. Connect to 3.3V power source.
17 8 15 DPLUS I/O Hi-Z USB D+ signal (See “DPLUS, DMINUS” on page 12).
18 9 16 DMINUS I/O Hi-Z USB D–signal (See “DPLUS, DMINUS” on page 12).
19 10 17 GND GND Ground.
20 11 18 V
CC
PWR V
CC
. Connect to 3.3V power source.
21 12 19 GND GND Ground.
22 N/A N/A SYSIRQ I Input USB interrupt request. (See “SYSIRQ” on page 13).
Active HIGH. Connect to GND if functionality is not
used.
23
24
25
N/A N/A GND GND Ground.
26
[3]
13
[3]
20 PWR500#
[2]
(PU 10K)
O bMaxPower request granted indicator. (See
“PWR500#” on page 14). Active LOW.
N/A for CY7C68320C/CY7C68321C 56-pin packages.
27 14 21 GND (RESERVED) Reserved. Tie to GND.
[+] Feedback
(50 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale